Dongguan Chenglue Electronic co.,Ltd
Dongguan Chenglue Electronic co.,Ltd
Add to Cart
Low Loss 470K 400VAC Y1 Safety Capacitor Flame-Retardant Epoxy Resin Package
Y1 Safety Capacitor .pdf
The Y1 capacitor is a safety capacitor, and such a capacitor will not cause electric shock after the capacitor fails, and will not endanger personal safety. It includes two types of X capacitors and Y capacitors. X capacitors are capacitors connected between the two lines of the power line (L-N), and metal film capacitors are generally used; Y capacitors are connected between the two lines of the power line and the ground (L-E , N-E) capacitance, generally appear in pairs. Based on the limitation of the leakage current, the value of the Y capacitor should not be too large. Generally, the X capacitor is uF level, and the Y capacitor is nF level. X capacitor suppresses differential mode interference, Y capacitor suppresses common mode interference
The bottom of the Y capacitor is divided into Y1, Y2, Y3, and Y4. The main differences are:
1. Y1 high voltage resistance is greater than 8 kV,
2. Y2 high voltage resistance is greater than 5 kV,
3. Y3 high pressure resistance n/a
4. Y4 high voltage resistance is greater than 2.5 kV
The Y1 capacitor is specially designed for AC electrical appliances, meets a number of safety certification standards, and is suitable for cross-line and bypass circuits. And it is suitable for AC circuits, compact in size, high in cost performance, and meets the safety standards of AC circuits. The X and Y capacitors are safety capacitors, the X capacitor is between the live wire and the neutral wire, and the Y capacitor is between the live wire and the ground. They are used in the power supply filter to play the role of power supply filtering, and filter the common mode (Y capacitor) and differential mode (X capacitor) interference respectively.
Feature
1. Small size.
2. AC capacitors that have passed and complied with safety certification.
3. The high-frequency loss is small, and it can withstand the impact of AC peak surges.
4. Strong over-current capability, small capacity and loss attenuation.
5. Long service life.
Advantages
1. We have all models of material, save you time looking for it.And recommend materials for you if you need.
2. With the same quality products,we can give you best price. Inquiries to after-sale, we will provide good service,such as update product status, technical support etc.(24 hour online)
3. We have many stocks, and the delivery time usually is short.
|
ITEM |
SPECIFICATION |
TEST METHOD AND CONDITION | ||||||||||||||||
| Temp Cycling
|
Appearance |
No marked defect |
The capacitor shall be introduced into the test chamber, and shall be exposed to the temperature conditions as shown in table at 5 cycles. pretreatment: The capacitor shall be placed at 125±2℃ for 1 hour, then placed at room condition for 24±2hours before initial measurement. Post-treatment: Capacitor shall be stored for 24±2 hours at room conditions.
| |||||||||||||||
|
Capacitance Change | B:±10% max E:±20% max F:±30% max | |||||||||||||||||
|
D.F. | B,E:5.0% max F:7.0% max | |||||||||||||||||
|
I.R. | 1000MΩ min | |||||||||||||||||
|
Humidity (Under Steady State) |
Appearance |
No marked defect |
Set the capacitor for 500±12 hours at 40±2℃ in 95±3% RH. pre-treatment: The capacitor shall be placed at 125±2℃ for 1 hour, then placed at room condition for 24±2 hours before initial measurement. Post-treatment: The capacitor shall be stored for 24±2 hours at room condition. | |||||||||||||||
|
Capacitance Change | B:±10% max E:±20% max F:±30% max | |||||||||||||||||
|
D.F. | B,E:5.0% max F:7.0% max | |||||||||||||||||
|
I.R. | 1500MΩ min | |||||||||||||||||
|
Dielectric Strength |
Per Item 8 | |||||||||||||||||
|
Life Test |
Appearance |
No marked defect | Apply a voltage of 500V.AC,except that once each hour the voltage is increased to 1000V.AC for 0.1sec.that shall be maintained for 1000±48 hours at 125±2℃. Pre-treatment: Capacitor shall be stored at 125±2℃ for 1 hour, then placed at room condition for 24±2H before initial measurements. Post-treatment: Capacitor shall be stored for 24±2 hours at room condition. | |||||||||||||||
|
Capacitance Change | B:±10% max E:±20% max F:±30% max | |||||||||||||||||
|
D.F. | B,E:5.0% max F:7.0% max | |||||||||||||||||
|
I.R. | 1500MΩ min | |||||||||||||||||
Product Voltage, Material, Size reference Table
| Product and size code | Rated AC Voltage | Temperature Characteristic | Rated Capacitance | Tolerance of Capacitance | Size (mm) | |||
| D.max | T.max | P±0.8 | d±0.05 | |||||
| Q065B□□100K□ | 400Vac | (B) | 10pF | K | 6.5 | 4.5 | 10 | 0.55 |
| Q065B□□150K□ | 15pF | 6.5 | 4.5 | 10 | 0.55 | |||
| Q070B□□220K□ | 22pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q070B□□330K□ | 33pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q070B□□470K□ | 47pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q070B□□560K□ | 56pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q070B□□620K□ | 62pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q070B□□820K□ | 82pF | 7.0 | 4.5 | 10 | 0.55 | |||
| Q065B□□101K□ | 100pF | 6.5 | 4.5 | 10 | 0.55 | |||
| Q065B□□221K□ | 220pF | 6.5 | 4.5 | 10 | 0.55 | |||
| Q075B□□331K□ | 330pF | 7.5 | 4.5 | 10 | 0.6 | |||
| Q085B□□471K□ | 470pF | 8.5 | 4.5 | 10 | 0.6 | |||
| Q085B□□561K□ | 560pF | 8.5 | 4.5 | 10 | 0.6 | |||
| Q095B□□681K□ | 680pF | 9.5 | 4.5 | 10 | 0.6 | |||
| Q110B□□821K□ | 820pF | 11.0 | 4.5 | 10 | 0.6 | |||
| Q115B□□102K□ | 1000pF | 11.5 | 4.5 | 10 | 0.6 | |||
| Q065E□□471K□ | (E) | 470pF | 6.5 | 4.5 | 10 | 0.55 | ||
| Q075E□□561K□ | 560pF | 7.5 | 4.5 | 10 | 0.6 | |||
| Q075E□□681K□ | 680pF | 7.5 | 4.5 | 10 | 0.6 | |||
| Q075E□□821K□ | 820pF | 7.5 | 4.5 | 10 | 0.6 | |||
| Q085E□□102K□ | 1000pF | 8.5 | 4.5 | 10 | 0.65 | |||
| Q095E□□152M□ | 1500pF | M | 9.5 | 4.5 | 10 | 0.65 | ||
| Q105E□□222M□ | 2200pF | 10.5 | 4.5 | 10 | 0.65 | |||
| Q115E□□332M□ | 3300pF | 11.5 | 4.5 | 10 | 0.65 | |||
| Q065F□□102M□ | (F) | 1000pF | 6.5 | 4.5 | 10 | 0.55 | ||
| Q075F□□152M□ | 1500pF | 7.5 | 4.5 | 10 | 0.6 | |||
| Q085F□□222M□ | 2200pF | 8.5 | 4.5 | 10 | 0.6 | |||
| Q100F□□332M□ | 3300pF | 10.0 | 4.5 | 10 | 0.65 | |||
| 4700pF | 11.5 | 4.5 | 10 | 0.65 | ||||
Specification and Test Method
| ITEM | SPECIFICATION | TEST METHOD AND CONDITION | |||||||||||||
| Storage Temp. Range | -40℃~+125℃ | ||||||||||||||
| Operating Temp. Range | -25℃~+125℃ | ||||||||||||||
| | Appearance has | | |||||||||||||
| | | | |||||||||||||
| | | Temp. 20±2℃ | |||||||||||||
| Dissipation Factor | B,E:2.5% max | | |||||||||||||
| | 10,000MΩ | | |||||||||||||
| | | | | ||||||||||||
| | | | |||||||||||||
| | B:-10~+10% |
| |||||||||||||
Production Process
